Service manual

7
(Operator Call Errors cont'd)
Alarm LED
blinking in
orange
Error [Error code] Solution Remarks
Inner cover open. [1841]
*2
Close the inner cover, and press the
Resume/Cancel button.
Inner cover open during
printing on paper. [1846]
*2
Close the inner cover, and press the
Resume/Cancel button.
Inner cover open during
printing on paper (print
continuable). [1851]
*1
Close the inner cover, and press the
Resume/Cancel button.
Inner cover open during
printing on paper (print NOT
continuable). [1856]
*1
Close the inner cover, and press the
Resume/Cancel button to clear the error.
The paper being printed at error
occurrence will be ejected without printing
the remaining data for the ejected paper,
then printing will resume from the next
page.
Inner cover closed during
CD / DVD printing (print
continuable). [1850]
*1
Open the inner cover which functions as
the CD / DVD tray feeder, set the CD /
DVD tray in the feeder, and press the
Resume/Cancel button.
6 times
Inner cover closed during
CD / DVD printing (print
NOT continuable). [1855]
*1
Open the inner cover, and press the
Resume/Cancel button to clear the error.
The CD or DVD being printed at error
occurrence will be ejected without printing
the remaining data for the ejected CD or
DVD, then the next print job will be done.
Multiple ink tanks of the
same color installed. [1681]
Replace the wrong ink tank(s) with the
correct one(s).
7 times
Ink tank in a wrong position.
[1680]
Install the ink tank(s) in the correct
position.
8 times Warning: The ink absorber
becomes almost full. [1700 /
1701 (Japan)]
Pressing the Resume/Cancel button will
exit the error, and enable printing.
The service call error, indicating
the ink absorber is full, is likely to
occur soon.
9 times The connected digital
camera or digital video
camera does not support
Camera Direct Printing.
[2001]
Remove the cable between the camera
and the printer.
10 times Automatic duplex printing
cannot be performed.
[1310]
Press the Resume/Cancel button to eject
the paper being used at error occurrence.
Printing will resume from on the front side
of the next page.
Data which was to be printed on
the back side of paper at error
occurrence is skipped (not
printed).
11 times Failed in automatic print
head alignment. [2500]
Press the Resume/Cancel button.
- If paper is being fed at error occurrence,
the error is indicated after the paper is
ejected.
- If the error occurs, the print head
alignment values are not changed.
- After exit from the error by the
Resume/Cancel button, the automatic
print head alignment will not be re-done.
The error is indicated when the
pattern is not printed due to no ink
or non-ejection of ink, when the
sensor's AD value is incorrect, or
when the paper is shorter than the
specified length.