Service manual

Details: Print the LF correction pattern on a sheet of paper. Select the Pattern No. (0 to 2) in which

streaks or lines are the least noticeable, press the Resume/Cancel button the same number

of time(s) as the selected Pattern No., then press the Power button.

1) In the LF correction mode, press the Resume/Cancel button the specified number of times

according to the paper to be used in LF correction listed in the table below, then press the Power

button. (Set a sheet of selected paper in the ASF.)

Time(s) Paper

1 time HR-101

2 times GF-500, Office Planner

3 times HP BrightWhite

4 times Canon Extra, STEINBEIS

Note: - Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light

alternately, Alarm in orange and Power in green.

- If the Resume/Cancel button is NOT pressed, and only the Power button is pressed, the

printer remains in the LF correction mode.

- If the Resume/Cancel button is pressed 5 times or more, then the Power button is

pressed, the printer returns to the service mode menu selection.

2) The LF correction pattern for the selected paper is printed.