User manual

70
Step
8
• After removing the protective plate, be careful not to drop screws, paper
clips, staples, or other metal objects inside the expansion slot. If any of
these objects should drop inside the expansion slot, do not plug the power
plug into the AC power outlet and contact your local authorized Canon
dealer.
4 Rotate the antenna to the position shown in the figure.
5 Insert NB-W2 into the expansion slot.
Hold the metal panel portion of NB-W2 and insert it while aligning it with the guide
rails inside the expansion slot.
IMPORTANT
• Insert NB-W2 securely.
• Do not touch the NB-W2 parts, printed wire, or connectors with your
hands.
6 Secure both sides of NB-W2 with the two screws supplied
with NB-W2.
IMPORTANT
• Rotate the antenna back to its original position after securing it with the
screws.