User manual

59
Step
8
IMPORTANT
• Do not touch the connector (A) or feed rollers (B) in the paper feeder. This
may result in damage to the printer or misfeeds.
• Do not install the paper feeder on a platform that may warp from the
weight of the printer and optional accessories, or where the printer is liable
to sink (such as a carpet or mat).
• Secure sufficient space around the paper feeder so that you can install the
printer and connect cords such as the power cord and interface cables.
8 When installing a paper feeder on another paper feeder,
match the positioning pins (A) and gently set it down.
When installing only one paper feeder, proceed to Step 10.
NOTE
Up to 3 paper feeders can be installed.
9 Fix the paper feeder using the four supplied screws.
Tighten the screws firmly.
(B)
(A)
(A)
(A)
- Front side
- Rear side