User manual

53
Step
8
Moving the Printer
When installing the paper feeder in the printer after installing the printer,
move the printer to an appropriate location temporarily using the following
procedure.
WARNING
Be sure to turn the printer and computer OFF, unplug the power plug,
and then disconnect all the interface cables from the printer before
moving the printer. Otherwise, the power cord or interface cables
may be damaged, resulting in a fire or electrical shock.
CAUTION
Do not carry the printer with the paper cassette attached. If you do
so, the paper cassette may drop resulting in personal injury.
1 Turn the printer and computer OFF a, remove the USB
cable b, and then disconnect the power plug from the AC
power outlet c.
2 Remove all the interface cables and the power cord from
the printer.
3 Pull out the paper cassette.
Pull the paper cassette out until it stops a.
• Required Peripheral Space (LBP5970)
Front Surface
Paper
cassette
Cassette
protective cover
65.2 (1656)
31.3 (795)
8.27
(210)
29.33 (745)
3.94
(100)
3.94
(100)
Top cover
Front cover
(in. (mm))
3.94
(100)
36.1 (917)
41.59 (1056.5)
47.17 (1198)
• Foot Positions of the Paper Feeder
The rubber feet are 0.20 in. (5 mm) high and their top surface is 0.71 in. (18 mm) in diameter.
(in. (mm))
Front Surface
2.48
(63)
17.40
(442)
7.56
(192)
2.48
(63)
17.40
(442)
7.56
(192)
16.87
(428.5)
3.10
(78.8)
1.48
(37.7)
16.93
(430)
3.05
(77.5)
1.40
(35.5)
a
a
b
c
a