User manual

42
Step
6
1 Make sure that the printer and computer are OFF.
2 Connect the B-type (square) end of the USB cable to the
USB connector on the rear side of the printer.
3 Connect the A-type (flat) end of the USB cable to the USB
port on the computer.
IMPORTANT
If you are using Windows and LBP5975 connected to a computer with a
USB cable, be sure to perform the following procedure after installing the
printer driver. If not, you cannot use the stapling function.
1. Display the [Device Settings] sheet in the printer driver.
2. Click [Get Device Status].
NOTE
If you are not sure about the USB cable that is supported by the computer
you are using, contact the store where you purchased the computer.
IMPORTANT
The supplied CD-ROM does not include the printer driver for Macintosh.
Download the printer driver for Macintosh that supports this printer from
the Canon website. If you cannot find the printer driver for Macintosh that
supports this printer on the Canon website, contact your local authorized
Canon dealer.
● Installing the Software
After connecting the USB cable, install the software for this printer. For
more details, see " Driver Guide".
CD-ROM