User manual

37
Step
5
● While holding the lock release lever of the rear paper guide a, slide the
guide to the mark for the size of the paper to be loaded
b.
● While holding the lock release lever of the side paper guides
a, slide
the guides to the mark for the size of the paper to be loaded
b.
The side paper guides move together.
3 Load the paper stack so that the rear edge is aligned with
the paper guide.
CAUTION
When loading paper, take care not to cut your hands with the edges
of the paper.
IMPORTANT
• Be sure to check if the paper guide is at the position of the size of the
loaded paper. If the paper guide is set at a wrong position, this may result
in misfeeds.
• If you use paper that has been poorly cut, multiple sheets of paper may be
fed at once. In this case, align the edges of the stack on a hard, flat
surface.
NOTE
To print letterhead paper or paper printed with a logo, load the paper in the
proper orientation according to the following instructions:
If the paper size is
indicated on the left,
align this point to the
size of the paper to
be loaded.
If the paper size is
indicated on the right,
align this point to the size
of the paper to be loaded.
a
b
Align this part
with the size of
the paper to be
loaded.
b
Top View
Top View
a