User manual

36
Step
5
1 Pull out the paper cassette.
Pull the paper cassette out until it stops a.
● After lifting the paper cassette up a little b, pull it out while supporting
it with the other hand in the figure
c.
CAUTION
Be sure to take the paper cassette out of the printer before loading
paper. If paper is loaded while the paper cassette is partially pulled
out, the paper cassette may drop or the printer may become
damaged resulting in personal injury.
IMPORTANT
The paper cassette cannot be pulled out horizontally. If you try to pull it out
forcefully, this may result in damage to the paper cassette.
2 According to the size of the paper to be loaded, adjust the
length of the paper cassette and change the positions of
the paper guides.
The paper sizes indicated on the paper guides are abbreviated as follows.
● Adjust the length of the paper cassette according to the size of the
paper to be loaded.
When loading paper in landscape orientation, such as when loading A4, B5, A5,
Letter, or Executive size paper, shorten the paper cassette.
When loading paper in portrait orientation, such as when loading A3, B4, Ledger
(11 x 17), or Legal size paper, extend the paper cassette.
To adjust the length of the paper cassette, push up the lock release levers gently
to release the lock, slide the paper cassette by holding the rear portion of the
paper cassette, and then push down the lock release levers to lock the cassette.
a
b
c
Paper Size Paper Guides
Ledger 11 x 17
Legal LGL
Letter LTR
Executive EXEC
Lock
Release
Lock
Release
Side View
Side View