User manual

23
Step
3
2 Tilt the fixing unit toward you.
While pressing the green lock release buttons (A) on the left and right side of the
fixing unit
a, hold the tabs (B) and tilt the fixing unit toward you b as shown in
the figure.
3 Open the top cover.
Press the blue lock release button of the top cover.
While holding the lever of the top cover, open the top cover.
IMPORTANT
• Do not touch the transfer belt of the ITB unit and the ITB unit cover. If the
transfer belt is damaged, this may result in misfeeds or deterioration in
print quality. If the print quality deteriorates due to the transfer belt of the
ITB unit being touched, see "Chapter 6 Routine Maintenance" in
User's Guide and clean the transfer belt of the ITB unit. The transfer belt of
the ITB unit is supplied with a function that cleans itself, therefore, you do
not need to clean the belt even when toner is on it.
a
a
b
(B)
(A)
CD-ROM
Do not touch
these parts.