User`s guide

List of Error Messages

3-6

Troubleshooting

List of Error Messages

List of Error Codes without Messages

If a job or operation does not complete successfully, check the error code, and perform the

necessary operations according to the error code displayed. You can check the error code on the

Details screen under [Log] from the System Monitor screen. (See "Job Details," in the Reference

Guide.)

If a send, receive, or fax job does not complete successfully, the error code is printed in the Results

column on the Activity Report and Send Report. (See "Printing Communication Reports," in the

Sending and Facsimile Guide.)

Perform the necessary procedures according to the error code.

NOTE

If a send job is cancelled, <STOP> is printed in the Results column on the Send report.

# 001

Cause Paper or originals are jammed.

Remedy Remove any jammed paper or originals. (See "Clearing Paper Jams," or "Feeder (DADF-L1)

(Optional)," in the Reference Guide.)

# 009

Cause 1 There is no paper.

Remedy Load paper. (See "Paper Drawers," in the Reference Guide.)

Cause 2 The paper drawer is not inserted correctly into the machine.

Remedy Insert the paper drawer properly. (See "Paper Drawers," in the Reference Guide.)

# 701

Cause The specified Department ID does not exist, or the password has changed.

Remedy Enter the correct Department ID or password using - (numeric keys) on the control panel,

and try again.