User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Paper Selection
2-14
2
Basic Copying Features
❑ Press [Next].
❑ Select the desired paper type ➞ press [OK].
If you are copying on the back side of a previously printed sheet, press
[2nd Side of 2-Sided Page].
IMPORTANT
•
When printing on special types of paper, such as heavy paper or transparencies,
be sure to correctly set the paper type, especially if you are using heavy paper. If
the type of paper is not set correctly, it could adversely affect the quality of the
image. Moreover, the fixing unit may become dirty and require a service repair, or
the paper could jam.
•
If you select a nonstandard paper size, the Multi-Page Enlargement, Rotate
Collate, Rotate Group, Offset Collate, Offset Group, Staple Collate, 1 2-Sided,
2 2-Sided, Book 2-Sided, Two-page Separation, Image Combination, Booklet, or
Transparency Interleaving mode cannot be specified.
NOTE
For more information on paper types, see Chapter 2, "Basic Operations," in the
Reference Guide.