User`s guide

Sample Set
1-55
1
Introduction to Copying
● To change the copy settings:
❑ Press [Change Settings] ➞ change the necessary settings ➞ press [Done].
To enter the number of copies, use - (numeric keys) and (Clear) to
clear your entry.
To change the exposure, press [ ] or [ ].
To change the paper size, press [Paper Select]. (See "Paper Selection," on p.
2-6.)
To collate the copies, press [Finisher]. (See "Collating Copies," on p. 2-56.)
To make two-sided copies, press [2-Sided Copy].
To set a margin for binding, press [Margin]. (See "Margin Mode," on p. 4-8.)
To make color balance adjustments, press [Color Balance]. (See "Adjusting
the Color," on p. 7-2.)
If you print one sample set and then change the setting, pressing [Sample
Set] prints the first set with the new setting.
If you want to check the changes that you have made, press [Sample Set] ➞
repeat step 3.