User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Interrupt Mode
1-51
1
Introduction to Copying
NOTE
The current job does not stop printing immediately after you press [Interrupt].
Printing of the current job stops only when the actual printing of the priority or
interrupt copy starts.
2
Place your originals ➞ set the desired copy modes.
NOTE
•
To cancel the Interrupt mode, press [Interrupt].
•
To cancel previously set copy modes, press (Reset). (The Interrupt mode itself is
not canceled.)
3
Press (Start).
When the interrupt copy job starts, [Interrupt] is grayed out.
4
Once the originals are scanned, remove them from the
machine.
When the interrupt copy job is complete, the interrupted job resumes.