User`s guide

Image Quality Adjustment
7-23
7
Special Copying Features - Color and Image Quality Adjustments
NOTE
• The Remove Background mode is already activated as the default setting. Only
when you select [Fine Adjustment] and change the setting, does <Remve Bgnd +
Fine Adj.> appear above [Image Qual. Adjustment] on the Special Features
screen.
• Pressing [ ] or [+] adjusts the density of each color. Press [ ] to make the color
lighter, or press [+] to make the color darker.
• If you make fine adjustments to the density, the automatic copy exposure setting is
canceled, and the original is scanned according to the Fine Adjustment settings.
4 Press [OK] ➞ [Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
5 Press (Start).
Copying starts.
NOTE
• To cancel this setting, press [Special Features] ➞ [▼] ➞ [Image Qual. Adjustment]
➞ [Cancel].
• To cancel all settings and return the machine to the Standard mode, press
(Reset).
Prevent Bleeding
This mode enables you to prevent the original image on the reverse side of thin
originals from appearing on the copies.
1 Place your originals ➞ press [A] ➞ [Special Features].
If necessary, see the screen shot in step 1 of "Remove Background," on p. 7-20.
2 Press [▼] or [▲] until [Image Qual. Adjustment] appears ➞
press [Image Qual. Adjustment].
If necessary, see the screen shot in step 2 of "Remove Background," on p. 7-20.