User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Overview of the imageRUNNER C3100/C3100N
1-8
1
Introduction to Copying
➞ See p. 5-5
Press to select or cancel the Job
Build mode. This mode enables you
to divide the originals into several
parts, scan them, and then print
them all together. This is convenient
when you cannot place all of the
originals that you want to copy at
one time. (See "Job Build," on p.
5-5.)
➞ See p. 5-10
Press to have the machine notify the user through e-mail when the copy job is done. (See
"Job Done Notice," on p. 5-10.)
Special Features Screen 2/2
The screen on the left appears if you press [▼] on
the Special Features screen.
➞ See p. 6-2 [Nega/Posi] Is Selected
Press to manipulate the image in the
copy by selecting [Nega/Posi],
[Image Repeat], or [Mirror Image].
(See "Using Image Creation
Modes," on p. 6-2.)