User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Adjusting the Color
7-9
7
Special Copying Features - Color and Image Quality Adjustments
4
Enter a name ➞ press [OK].
The maximum number of characters that you can enter for a key name is 10.
The assigned name appears on the key.
NOTE
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
•
If you press [OK] without entering any characters, the key name reverts to its
current name (default C1 to C4).
5
Press [Cancel] ➞ [OK] ➞ [Done].
The display returns to the Copy Basic Features screen.
NOTE
Pressing [Cancel] ➞ [OK] ➞ [Done] only names the selected key ([C1] to [C4]), but
does not recall the color balance settings. If you press [OK] ➞ [OK] ➞ [Done], the
name is stored in the selected key ([C1] to [C4]), and the color balance settings are
recalled at the same time.
Recalling Color Balance Settings
1
Press [Special Features] ➞ press [▼] or [▲ ] until [Color
Balance] appears ➞ press [Color Balance].
If necessary, see the screen shots in steps 1 and 2 of "Adjusting the Color
Balance," on p. 7-2.