User`s guide

Area Designation
6-37
6
Special Copying Features - Image Editing
Using the Numeric Keys
1 Place your original on the platen glass ➞ press [Special
Features].
If necessary, see the screen shot in step 1 of "Inverting Images (Nega/Posi)," on
p. 6-4.
2 Press [▼] or [▲] until [Area Designation] appears ➞ press
[Area Designation].
If necessary, see the screen shot in step 2 of "Using the Edit Pen," on p. 6-20.
3 Press [Numeric Key Entry].
If necessary, see the screen shot in step 3 of "Using the Numeric Keys," on p.
6-26.
IMPORTANT
• Before performing the next step, you must manually measure the size and position
of the area that you want to designate on the original.
• When you measure the XY values, always start measuring from the image out to
the right side edge of the original, and up to the top of the original. These
measurements tell the machine the desired framed area's size and position.
-
-
-
-
[X1]:
[X2]:
[Y1]:
[Y2]:
The distance of the area's right border to the original's right edge.
The distance of the area's left border to the original's right edge.
The distance of the area's top border to the original's top edge.
The distance of the area's bottom border to the original's top edge.
Original
Result
How to Measure the Area to Be Framed
[X1] = 5 1/2" [X2] = 7 1/4" [Y1] = 1 1/8" [Y2] = 1 7/8"
8 1/2" 8 1/2"
AB
CDCD
Y1
Y2
X2
X1
11" 11"