User`s guide

Table Of Contents
Area Designation
6-23
6
Special Copying Features - Image Editing
You can designate up to 10 points.
IMPORTANT
If you select [Multi-point] only one area can be designated at a time.
An area that is designated by selecting [Multi-point] cannot be modied using the
numeric keys on the inch entry pop-up screen or - (numeric keys) on the
control panel.
6
Press [Framing].
If you want to use different settings for different areas, select the area by pressing
the appropriate area key select [Framing] or [Blanking].
7
Press [Preview] check the designated area press [Done].