User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Using Image Creation Modes
6-5
6
Special Copying Features - Image Editing
3
Press [Nega/Posi] ➞ [Done] ➞ [Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
4
Press (Start).
Copying starts.
NOTE
•
To cancel this setting, press [Special Features] ➞ [▼] ➞ [Image Creation] ➞
[Nega/Posi].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Image Repeat
This mode enables you to repeatedly copy the entire original image in either the
vertical or horizontal direction. The following two settings are available for the Image
Repeat mode.
IMPORTANT
•
To use Area Designation (Framing) with the Image Repeat mode, first specify the Image
Repeat mode, and then designate the desired area. Only one area can be designated.
•
If the number of times the image to be repeated is set to too many or the designated area
is too small, the color original may be scanned in the Black mode, even if the color mode
is set to 'Auto-Color Select'.