User`s guide

Job Build
5-6
5
Special Copying Features - Scan Settings and Notifications
NOTE
• If you place different size originals in the feeder, set the Different Size Originals mode.
• If you want to copy one-sided and two-sided originals as two-sided copies, divide the
originals into one-sided and two-sided batches. For example, if the first batch of originals
to be copied consists of two-sided originals, set the Two-sided Original mode. Thereafter,
you have to manually set or cancel the Two-sided Original mode for each batch of
originals that you scan.
• It is useful to store originals in an inbox first and print them later using the Merge
Documents mode if you cannot prepare the originals at one time, or if you want to specify
different settings for each original. (See Chapter 5, "Using/Arranging Documents Stored
in an Inbox," in the Mail Box Guide.)
1 Place your first batch of originals ➞ press [Special Features].
If necessary, see the screen shot in step 1 of "Different Size Originals," on p. 5-2.
2 Press [Job Build] ➞ [Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
3 Press (Start).
Scanning starts.
NOTE
To cancel scanning, press [Cancel] or (Stop).