User`s guide

Different Size Originals
5-2
5
Special Copying Features - Scan Settings and Notifications
Different Size Originals
This mode enables you to copy different size originals together.
IMPORTANT
• The Different Size Originals mode cannot be used with the Multi-Page Enlargement,
Book 2-Sided, Two-page Separation, Image Combination, Booklet, or Image Repeat
mode.
• If the originals are placed in the feeder, make sure that the different size originals are of
the same weight (paper type).
• Align the top edge of the originals with the back edge of the feeder if you are placing
originals with different widths.
• Set different size originals with different widths and lengths in the following combinations.
Other combinations may damage the originals.
- 11" x 17" and LGL, LTR and LGL, LTR and LTRR.
• If you place originals with different widths in the feeder, the originals may move slightly
when fed to the platen glass. As a result, the images may be scanned and copied as
slanted.
• If the Different Size Originals mode is set in combination with the Shift mode or the
Cover/Sheet Insertion mode, you cannot use the Automatic Paper Selection mode.
• Stapling cannot be performed if you place originals with different widths.
• If the Different Size Originals mode is set, Auto Orientation is not performed.
• If the Different Size Originals mode is set, the scanning speed is slower than normal.
NOTE
If the Different Size Originals mode is used with the 1 2-Sided mode, the copies are
output as one-sided copies on paper of their respective sizes if the originals for the front
and back sides of a two-sided copy are different in size.