User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Frame Erase
4-22
4
Special Copying Features - Image Adjustment
Binding Erase
This mode erases the shadows that appear on copies from binding holes on
originals.
IMPORTANT
•
The Binding Erase mode cannot be used with the Entire Image, Multi-Page Enlargement,
Book 2-Sided, Two-page Separation, Booklet, Image Repeat, Mirror Image, or Area
Designation (Framing) mode.
•
Do not place originals with binding holes in the feeder, as this may damage the originals.
•
If you are using the Binding Erase mode, the borders you do not select are also erased
by 1/8" (4 mm).
1
Place your original on the platen glass ➞ press [Special
Features] ➞ [Frame Erase].
If necessary, see the screen shot in step 1 of "Original Frame Erase," on p. 4-14.
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
2
Press [Binding Erase] ➞ select the border where the binding
holes are located.
The border is where the binding holes are located on the original, if you visualize
the original as being face up.