User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Frame Erase
4-15
4
Special Copying Features - Image Adjustment
2
Press [Original Frame Erase].
3
Press [ ] or [+] to set the frame erase width.
NOTE
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use - (numeric keys), and
(Clear) to clear your entries.
•
You can change the value by pressing [ ] or [+], even if you have entered the value
using - (numeric keys).
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
The default setting is '1/8" (4 mm)'. The maximum original frame erase width that
you can set is '1 15/16" (50 mm)'.