User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Margin Mode
4-10
4
Special Copying Features - Image Adjustment
● If you select [Left Margin] or [Right margin]:
❑ Press [ ] or [+] to set the margin width for the front and back (0" to 13/16" or 0
mm to 20 mm) ➞ press [OK] ➞ [Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
● If you select [Top Margin] or [Bottom Margin]:
❑ Press [ ] or [+] to set the margin width (1/16" to 13/16" or 1 mm to 20 mm) ➞
press [OK] ➞ [Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
•
When entering values in millimeters, you can also use - (numeric keys), and
(Clear) to clear your entries.
•
You can change the value by pressing [ ] or [+], even if you have entered the value
using - (numeric keys).
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.