User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Margin Mode
4-9
4
Special Copying Features - Image Adjustment
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
2
Select the desired margin type ➞ enter the margin width.
IMPORTANT
•
If you are using the Margin and Two-sided modes together and copying an original
that already has a left or right margin, follow the instructions below:
•
If you are using the Margin and Two-sided modes together and copying an original
that does not have a margin, follow the instructions below:
NOTE
•
To enter values in millimeters, press [mm].
•
The default setting is '3/8" (10 mm)'.
- 1 2-Sided:
- 2 2-Sided:
- 2 1-Sided:
Set the Margin mode for the back only.
You do not need to set the Margin mode. Proceed to make copies
in the usual way.
Set the Margin mode for the back only.
- 1 2-Sided:
- 2 2-Sided:
- 2 1-Sided:
Set the Margin mode for both the front and back.
Set the Margin mode for both the front and back.
Set the Margin mode for both the front and back.