User`s guide

Table Of Contents
Transparency Interleaving
3-23
3
Special Copying Features - Document Layout
If the following screen is displayed, press [OK] perform either of the following
procedures in Common Settings (from the Additional Functions screen) (See
Chapter 4, "Customizing Settings," in the Reference Guide.):
Set Register Paper Type for the selected paper source to [Transparency].
Set the paper type setting to [Transparency] if Stack Bypass Standard Settings
is set to 'On'.
IMPORTANT
Make sure that transparencies are loaded into the selected paper source. Loading
paper types other than transparencies may result in a paper jam.
3
Select whether to copy on the interleaf sheets press [Next].