User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Booklet Mode
3-18
3
Special Copying Features - Document Layout
NOTE
•
If the number of sheets is 16 or more, the booklet cannot be saddle stitched.
•
The number of saddle stitched booklets that the booklet tray can hold depends on
the number of sheets that each booklet contains.
•
If you select [Add Cover], the maximum number that the booklet tray can hold is 10
sets.
•
Saddle stitching is not performed if there is only one output sheet.
•
If you set the Booklet mode, the Center Shift mode is also automatically set.
5
Set the Booklet Tray guide to match the paper size.
IMPORTANT
Make sure to set the Booklet Tray guide correctly to match the paper size. Setting
the Booklet Tray guide incorrectly may result in a paper jam.
6
Press [Done].
The display returns to the Copy Basic Features screen.
7
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Copying starts.
- 1 to 5 sheets: 25 sets
- 6 to 10 sheets: 15 sets
- 11 to 15 sheets: 10 sets
11" x 17" or LGL LTRR