User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Changing Color Modes
2-87
2
Basic Copying Features
1
Place your originals ➞ press the color selection drop-down
list ➞ press [Auto-Color Select].
2
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Copying starts.
NOTE
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Full Color
The Full Color mode always copies in color regardless of whether the original is in
color or black-and-white.
If you select [Auto-Color Select], originals that contain few color sections or
originals with light color densities and colors close to black, may be copied in the
Black mode. In this case, select the Full Color mode manually.
NOTE
If a black-and-white original is copied in the Full Color mode, it is counted as a color copy.
Color Selection