User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Two-Sided Copying
2-83
2
Basic Copying Features
NOTE
•
To cancel this setting, press [Two-sided] ➞ [Cancel].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Book to 2-Sided
This feature enables you to make two-sided copies from facing pages, or from the
front and back sides of a page in bound originals, such as books and magazines.
IMPORTANT
•
The Book 2-Sided mode cannot be used with the Saddle Stitch, Multi-Page
Enlargement, Two-page Separation, Cover/Sheet Insertion, Image Combination, Binding
Erase, Different Size Originals, Booklet, Transparency Interleaving, Image Repeat, or
Area Designation mode.
•
Only LTR paper can be used for Book 2-Sided copying.
•
If you select [Front/Back Two-sided], the front side of the first two-sided page and the
back side of the last two-sided page are left blank. (The machine's counter does not
count the blank pages as copies.)
•
Place your original on the platen glass. The Book 2-Sided mode cannot be used when
the original is placed in the feeder.
1
Place your original on the platen glass ➞ press [Two-sided].
To make copies in the correct page order, begin copying from the first open page
of the book or bound original.
Place your original face down, making sure that its top edge is aligned with the
back edge of the platen glass (by the arrow in the top left corner).