User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Two-Sided Copying
2-80
2
Basic Copying Features
3
Press [OK].
The display returns to the Copy Basic Features screen, and <2 2-Sided> is
displayed above [Two-sided].
4
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Copying starts.
NOTE
•
To cancel this setting, press [Two-sided] ➞ [Cancel].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
2 to 1-Sided
This feature automatically turns over two-sided originals placed in the feeder to
make one-sided copies on different sheets of paper.
IMPORTANT
•
2 1-Sided copying is available only if the optional Feeder (DADF-L1) is attached.
•
The 2 1-Sided mode cannot be used with the Saddle Stitch, Multi-Page Enlargement,
Two-page Separation, Image Combination, Booklet, or Transparency Interleaving mode.
•
Make sure to place originals with a horizontal (landscape) orientation, such as LTRR,
horizontally. If these originals are placed vertically, the back side of the copy is printed
upside down.