User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Two-Sided Copying
2-78
2
Basic Copying Features
4
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Copying starts.
NOTE
•
To cancel this setting, press [Two-sided] ➞ [Cancel].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
2 to 2-Sided
This feature enables you to make two-sided copies from two-sided originals. If a
two-sided original is placed in the feeder, it is automatically turned over so that both
sides of the original are copied on the front and back sides of a copy sheet.
IMPORTANT
•
2 2-Sided copying is available only if the optional Feeder (DADF-L1) is attached.
•
The 2 2-Sided mode cannot be used with the Multi-Page Enlargement, Two-page
Separation, Image Combination, Booklet, or Transparency Interleaving mode.
1
Place your originals in the feeder ➞ press [Two-sided].
NOTE
If Auto Collate in Copy Settings (from the Additional Functions screen) is set to
'On', the Collate or Offset Collate mode is automatically set when you place your
originals in the feeder. (See "Auto Collate," on p. 9-6.)