User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Two-Sided Copying
2-75
2
Basic Copying Features
• Front/Back Two-sided
This setting makes two-sided copies from the front and back sides of a page.
1 to 2-Sided
This feature enables you to make two-sided copies from one-sided originals.
IMPORTANT
•
The 1 2-Sided mode cannot be used with the Multi-Page Enlargement, Two-page
Separation, Image Combination, Booklet, or Transparency Interleaving mode.
•
Make sure to place originals with a horizontal (landscape) orientation, such as LTRR and
STMTR, horizontally. If these originals are placed vertically, the back side of the copy is
printed upside down. (You can place STMTR originals only on the platen glass.)
NOTE
•
If there are an odd number of originals, the back side of the last copy is left blank. (The
machine's counter does not count the blank page as a copy.)
•
If the Two-sided mode is used with the Different Size Originals mode, the copies of
different size originals will be printed as one-sided copies on paper of their respective
sizes. If you want to make two-sided copies with different size originals, you must select
the paper size beforehand. (See "Paper Selection," on p. 2-6.)
2
1
2
1
Copies
Original