User`s guide

Table Of Contents
Collating Copies
2-63
2
Basic Copying Features
[Hole Punch] appears only if the optional Puncher Unit-M1 is attached to the
optional Finisher-Q1 or Saddle Finisher-Q2.
If you want hole punches made, press [Hole Punch].
[Offset] appears only if an optional finisher is attached.
[Rotate] appears only if an optional finisher is not attached.
If you select [Rotate]:
Press [Next] select [LTR] or [LTRR].
IMPORTANT
[Rotate] can be selected only in the following cases:
- If the available paper size is selected manually
- If the available paper size is loaded in both the horizontal and vertical directions
- The selected paper source must have Drawer Eligibility For APS/ADS in Common
Settings (from the Additional Functions screen) set to 'On'. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
3
Press [OK].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
4
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display press (Start) once for each original. When scanning
is complete, press [Done].
Copying starts.