User`s guide

Collating Copies
2-59
2
Basic Copying Features
• If you select [Double] (Left):
• If you select [Saddle Stitch]:
IMPORTANT
• The Staple mode cannot be used with the Multi-Page Enlargement, Booklet,
Transparency Interleaving, or Mirror Image modes.
• The Saddle Stitch mode cannot be used with the Hole Punch, 2 1-Sided,
Book 2-Sided, Automatic Paper Selection, Two-page Separation, Cover/Sheet Insertion,
or Image Combination mode, in addition to the above mentioned modes.
• The accuracy of folds created in the Saddle Stitch mode may vary, depending on the
paper type and the number of sheets.
NOTE
• To use the Saddle Stitch mode, the original must already be in booklet form, as shown in
the illustration above. (See "Booklet Mode," on p. 3-13.)
• [Saddle Stitch] can be set only if the 1 2-Sided or 2 2-Sided mode is selected. (See
"Two-Sided Copying," on p. 2-73.)
■ If No Finisher Mode Is Set:
If the Collate, Group, and Staple modes are not set, copies are output as follows:
4
3
2
1
1 1 1
Originals
Three Copies
of Each Page
Collated in
Page Order
Set 1
Set 2
Set 3
6
5
4
3
3
8
7
2
1
6
8
1
3
6
8
1
3
6
8
1
Originals
Three Copies
of Each Page
Collated in
Page Order
Set 1
Set 2 Set 3
4
3
4
3
2
2
1
1
Originals Copies