User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Changing the Copy (Zoom) Ratio
2-49
2
Basic Copying Features
4
Use the numeric keys or press [ ] or [+] on the touch panel
display to enter a copy ratio ➞ press [OK].
You can also use - (numeric keys) to enter values, and (Clear) to clear
your entries.
You can change the value by pressing [ ] or [+], even if you have entered the
value using - (numeric keys).
The display returns to the Copy Basic Features screen, and the specified copy
ratio is displayed.
NOTE
•
If you make a mistake when entering values, press [C] on the touch panel display
➞ enter the correct values.
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
5
Press (Start).
Copying starts.
NOTE
•
If you press (Stop) while copying is in progress to cancel the copy job and then
press (Start) again, copying resumes from the first sheet of the divided image.
•
To return the copy ratio to 100%, press [Direct].
•
To cancel this setting, press [Copy Ratio] ➞ [Multi-Page Enlarge] ➞ [Cancel].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).