User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Changing the Copy (Zoom) Ratio
2-46
2
Basic Copying Features
Multi-Page Enlargement
This mode enables you to enlarge an original to a size larger than 11" x 17" by
copying parts of the original over several sheets of paper, and then pasting the
sheets together.
You can specify the copy ratio for Multi-Page Enlargement by percentage, or by
setting the number of output pages that the original image should be copied over.
IMPORTANT
•
The Multi-Page Enlargement mode cannot be used with the Entire Image, Automatic
Color Selection, Finisher, Two-sided, Automatic Exposure Control, Two-page Separation,
Cover/Sheet Insertion, Image Combination, Shift, Booklet, Transparency Interleaving,
Margin, Different Size Originals, Job Build, Frame Erase, Image Repeat, Mirror Image, or
Area Designation mode.
•
The Automatic Paper Selection mode cannot be set if the Multi-page Enlargement mode
is specified according to the number of output pages.
•
If you set the Multi-Page Enlargement mode while the color mode is set to 'Auto-Color
Select', the color mode is automatically set to 'Full Color'.
NOTE
•
Copies of the original image made in the Multi-Page Enlargement mode overlap. Join
neighboring sheets together by pasting over the overlapping areas.
•
You cannot make more than one copy of the original (over multiple sheets of paper) at
one time using the Multi-Page Enlargement mode.
•
The Multi-Page Enlargement mode cannot be used to make copies on transparencies or
nonstandard size paper.
Determining the Copy Ratio and Number of Sheets Needed
If you create a multi-page enlargement by specifying the copy ratio (as opposed to
specifying the number of output sheets), the number of output pages changes
according to the size of the original, the copy ratio setting, and the size of the copy
paper.
Refer to the following table to determine the desired copy ratio.
Reproduction
Ratio (%)
Paper Size
Total Sheets of
Paper
Total Size
200 11" x 17" 9 22" x 17"
200 8 1/2" x 11" (LTR) 15 22" x 17"
200 8 1/2" x 11" (LTRR) 12 22" x 17"
300 11" x 17" 16 33" x 51"
300 8 1/2" x 11" (LTR) 28 33" x 51"