User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Changing the Copy (Zoom) Ratio
2-44
2
Basic Copying Features
❑ Press [OK].
You can also use - (numeric keys) to enter values, and (Clear) to clear
your entries.
You can change the values by pressing [ ] or [+], even if you have entered the
values using - (numeric keys).
The selected mode is set, the display returns to the Copy Basic Features
screen, and the specified copy ratios are displayed.
NOTE
•
If you make a mistake when entering values, press [C] on the touch panel display
➞ enter the correct values.
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
● To have the copy ratios automatically specified (Auto XY Zoom):
❑ Press [Auto XY Zoom] ➞ [OK].
The display returns to the Copy Basic Features screen, and the copy ratios
generated by the machine are displayed.
IMPORTANT
If you select [Auto XY Zoom], make sure that you select a paper size other than
[Auto]. If you do not specify a paper size, Paper Drawer 1 is automatically selected
and the copy ratios are set to match the size of the paper loaded in that drawer.