User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Changing the Copy (Zoom) Ratio
2-36
2
Basic Copying Features
2
Press [Entire Image] ➞ [Done].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
3
Press (Start).
Copying starts.
NOTE
•
To cancel this setting, press [Copy Ratio] ➞ [Entire Image].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Reducing/Enlarging Using the Original and Copy Sizes
The Zoom Program mode enables you to reduce or enlarge originals by individually
entering the dimensions of the original and copy paper. Any copy ratio from 25% to
400% can be used.
The following two Zoom Program modes are available.
NOTE
The specified sizes are converted into a copy ratio (%) by the machine using the formula
below. The result is rounded to the nearest integer.
Copy ratio (%) = (copy size / original size) x 100
■ Making Copies with the Same XY Copy Ratio (Zoom)
The copy ratio you set is used for both the horizontal (X) and vertical (Y) axes.
■ Making Copies with Different XY Copy Ratios (XY Zoom)
You can set different copy ratios for the horizontal (X) and vertical (Y) axes.