User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Changing the Copy (Zoom) Ratio
2-35
2
Basic Copying Features
Entire Image
If you are copying an original with an image that extends all the way to the edges
onto the same size paper at a copy ratio of 100%, the periphery of the original
image may be cut off slightly on the copy. However, if you set the Entire Image
mode, the image is slightly reduced so that the entire image is copied without being
cut off.
The Entire Image mode should also be set when you want to copy 11" x 17"
originals onto paper larger than 11" x 17" to ensure that the edges of the originals
are not cut off. Make sure to place the originals on the platen glass, and load the
stack bypass with 12 5/8" x 17 11/16" or 12" x 18" paper, or load a paper drawer
with 12" x 18" paper. (See "Platen Glass," on p. 1-23, and "Paper Selection," on p.
2-6.)
IMPORTANT
The Entire Image mode cannot be used with the Multi-Page Enlargement, Booklet,
Frame Erase, Image Combination, Image Repeat, or Mirror Image mode.
NOTE
The reduction ratios when the Entire Image mode is specified are:
1
Place your originals ➞ press [Copy Ratio].
- 11" x 17": 98.1% (12" x 18": 100%)
- LGL: 97.7%
- LTR: 97.1%
- STMT: 96.3%