User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How To Use This Manual
- Legal Notices
- All About Color
- Preserving Color Copies
- Introduction to Copying
- Basic Copying Features
- Special Copying Features - Document Layout
- Special Copying Features - Image Adjustment
- Special Copying Features - Scan Settings and Notifications
- Special Copying Features - Image Editing
- Special Copying Features - Color and Image Quality Adjustments
- Memory Functions
- Customizing Settings
- Appendix
Changing the Copy (Zoom) Ratio
2-32
2
Basic Copying Features
NOTE
•
To return the copy ratio to 100%, press [Direct].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Auto Zoom
You can set the machine to automatically select the appropriate copy ratio based on
the size of the original and the selected copy paper. The same copy ratio is used for
the horizontal (X) and vertical (Y) axes. Any copy ratio from 25% to 400% may be
used.
IMPORTANT
•
You cannot use the Auto setting on the Copy Ratio screen with the Automatic Paper
Selection or Image Repeat (Auto) mode.
•
You cannot copy highly transparent originals, such as transparencies, using the Auto
setting on the Copy Ratio screen. Use the Preset Zoom or Zoom by Percentage mode
instead.
•
To use the Auto setting on the Copy Ratio screen, your originals must conform to one of
the standard paper sizes:
11" x 17", LGL, LTR, LTRR, STMT, or STMTR. (You can place STMTR originals only on
the platen glass.)
NOTE
If you notice a difference between the automatic copy ratio and the actual copy size, you
can try to eliminate this error by making a Zoom Fine Adjustment in Adjustment/Cleaning
(from the Additional Functions screen). (See Chapter 4, "Customizing Settings," in the
Reference Guide.)
1
Place your originals ➞ press [Paper Select].