Operation Manual

Turn on the controller
Introduction
You are advised to turn on the system in the following order.
1.
The controller
2.
The printer
Illustration
On/Off
[169] The location of the on/off button
Turn on the controller
1.
Use one of the following options to turn on the controller.
Press the Sleep button at the right-hand side of the operator panel if the system was
shut down from the operator panel.
•
•
Press the on/off button of the controller
The controller needs about 1 minute to start up.
•Turn on the printer, on page 97
Chapter 5 - Power information96
Turn on the controller