Operation Manual

Stacker/stapler components and their functions#
FunctionNo.
Buffer Pass Unit-F1 (standard)
Buffer Pass Unit-F1 is required to attach Staple Finisher-A1 or Booklet
Finisher-A1 to the main unit. Open Buffer Pass Unit-F1 to remove jammed
paper.
1
Front Cover of Staple Finisher-A1/Booklet Finisher-A1
Open this cover to replace the staple cartridge, remove jammed paper, or
clear a staple jam from the stapler unit and saddle stitcher unit.
2
Booklet tray (Booklet Finisher-A1)
Saddle stitched or saddle folded prints are output to this tray.
3
Lower tray
Prints are output to this tray.
4
Middle tray
Prints are output to this tray.
5
Upper tray
Prints are output to this tray.
6
Chapter 2 - Main parts34
Stacker/stapler and integrated punch unit