Operation Manual

#
NOTE
When loading paper, make sure that the height of the paper stack does not exceed
20 mm (13/16"). If the height of the paper stack exceeds 20 mm (13/16"), the edges
of the paper stack may become curled or creased, and poor print quality may result.
18.
Place a magnet label indicating the new paper size onto the paper deck.
19.
Close the paper deck.
The inside lifter automatically rises and prepares the paper deck for feeding.
#
CAUTION
When closing the paper deck, be careful not to get your fingers caught, as this
may result in personal injury.
•Load the media into the bulk paper modules, on page 257
Chapter 9 - Paper, toner, and staples 271
Adjust the media size for the bulk paper module