Instruction Manual

53
Copy Card Reader-F1
Item Speci cations
Available Cards Magnetic
Card Readout Method Magnetic readout
Magnetic Card Reading
Direction
Face up
Store/Replay Replay
Power Source From the main unit
Dimensions (H x W x D)
1 5/8” x 3 1/2” x 3 3/4” (40 mm x 88 mm x 96 mm)
(excluding the attachment kit and cable)
Weight
Approximately 7.1 oz (200 g)
(including the attachment kit and cable)
Super G3 FAX Board-AE2

Speci cations remain the same even when the Super G3 2nd Line Fax Board or Super G3 3rd/4th Line Fax Board is installed.
Item Speci cations
Telephone Line Used
*1
Public Switched Telephone Network
Scan line Density (Scan,
Transmission)
Normal: 8 pels*²/mm x 3.85 line/mm
Fine: 8 pels*²/mm x 7.7 line/mm
Super-Fine: 8 pels*²/mm x 15.4 line/mm
Ultra-Fine: 16 pels*²/mm x 15.4 line/mm
Transmission Speed Super G3: 33.6 kbps, G3: 14.4 kbps
Compression Method MH, MR, MMR, JBIG
Transmission Type Super G3, G3
Sending Original Sizes 11" x 17" to STMTR
Receiving Paper Sizes 11" x 17" to STMTR
Transmission Times JBIG: Approximately 2.6 seconds
Auto Dial Function
Address Book: 1,800 destinations
(including destinations stored in one-touch buttons)
Image Memory Approximately 6,000 pages
*1 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It is recommended to use
facsimile communication via a general telephone (Public Switched Telephone Network) line.
*2 Pels stands for picture elements (pixels).
Before using this machine: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012
Downloaded from www.Manualslib.com manuals search engine