User Manual

150
Output Area
1
Open the output slot on the outside of the  nisher, and remove any jammed
paper that is visible.
If you cannot see any jammed paper, check if any jammed paper is stuck inside the output area of
the  nisher.
1 Open the output slot.
2 Remove any jammed paper.
3 Close the output slot.
If a paper jam occurs when you are printing in the Staple mode, do not remove the output sheets that are
waiting to be stapled. (Printing and stapling resume after you clear the paper jam.)
2
Open the front cover of the  nisher.
*2*1
*1 Booklet Finisher-P1
*2 Staple Finisher-P1
If the Document Insertion/Folding Unit-H1 or Document Insertion Unit-L1 is attached, open the
insertion unit.