User Manual

77
Using the System Options/MEAP Applications
3
Installing the System
Options Using the Remote UI
(Manual)
You can install system options in the machine using the
Remote UI.
1
From the portal page of the Remote UI, click
[Settings/Registration] → [License/Other] →
[Register/Update Software].
2
Click [Manual Installation].
3
Click [Browse] → select the license file to install →
click [Next].
License File: A file with the ‘lic’ extension.
• The file path for the application file is not used in the above
procedure.
• You can also specify the file path by entering it directly.
4
Check the contents that will be installed on the
confirmation screen → click [Install].
Installing a System Option
Using the Touch Panel
Display
You can register a license key and install a system option in the
machine using the touch panel display.
1
Press (Settings/Registration)→ [Management
Settings] → [License/Other] → [Register License].
2
Enter the license key using - (numeric keys).
Details of each item are shown below.
: Press to move the position of the cursor.
[Backspace]: Press when you enter an incorrect number. The last
number entered is deleted, enabling you to enter the correct
number.
If the message <The value of the license key is incorrect. Check
the license key.> appears, press [OK] → enter the correct license
key.
If the message <The feature required for installation is not
present.> is displayed, you cannot register the license key. Press
[OK] → cancel the registration.
3
Press [Start] → [OK].
The registered function becomes available after you restart the
machine.