User`s guide

1
Basic Copy Settings 2-77
2
Making Copies in the Voice Navigation Mode
[Rotate 90 Degrees] appears only if an
optional finisher is not attached.
● If you want holes made in your out-
put:
❑ Move the focus to [Hole Punch] ➞
press (Select).
NOTE
You may be able to select the type of
holes to punch, depending on your
location or the optional equipment
attached to the machine.
● If you want fold made in your out-
put:
❑ Move the focus to [Fold] ➞ press
(Select).
❑ Move the focus to desired fold type
and press (Select) ➞ press
(Confirm).
● If you want to offset the output:
❑ Move the focus to [Offset] ➞ press
(Select).
Downloaded from ManualsPrinter.com Manuals