User`s guide

1
Basic Copy Settings 2-69
2
Making Copies in the Voice Navigation Mode
IMPORTANT
• The Finishing modes cannot be set if
Transparency, Tracing Paper, or Labels is
selected as the paper type.
• The Finishing mode cannot be used with
other copy modes, depending on the model
of the machine. When the focus moves
[Finishing], you hear a message "cannot
select this with the current settings."
NOTE
• To use the Staple mode, an optional
finisher must be attached to the main unit.
• The Face Up/Face Down mode enables
you to specify whether to output paper face
up or face down. Press [Face Up/Face
Down], and then select from the following:
- [Auto]: If you are copying a single page
original, copying on nonstandard size
paper, or other available paper that is
loaded in the multi-purpose tray, the
printed sheets are output face up.
Otherwise, the printed sheets are output
face down.
- [Face Down (Normal)]: Printed sheets are
always output face down.
- [Face Up (Reverse)]: Printed sheets are
always output face up.
Downloaded from ManualsPrinter.com Manuals