User Manual

64
Starting to Use the Various Functions of the Machine
2
7
Press [Close].
The USB setting is set.
Next, follow the steps below to enable the scan/print functions.
8
Press [Function Settings].
9
Press [Store/Access Files].
10
Press [Memory Media Settings].
11
Press [Use Scan/Print Function].
12
Set <Use Scan/Print Function> and <Use Print
Function> to ‘On’ → press [OK].
13
Press [Close].
14
Turn OFF the main power of the machine, and then
turn ON the main power again.
The [Use MEAP Driver for External USB Device], <Use Scan
Function>, and <Use Print Function> settings become effective
only after turning the machine’s main power OFF, and then ON.
Scanning an Original
You can store data scanned with the machine in a storage
location. This section describes the procedure for storing data
in the Advanced Box of another imageRUNNER ADVANCE
series machine on the network.
1
Place your original on the machine.