User Manual

22
Operations Required to Use the Machine
1
Managing by Using the
Remote UI
If you use the Remote UI, you can access the
machine using a Web browser to manage the
machine and check its status from a computer.
Preparations for Using the
Remote UI
To start the Remote UI, it is necessary to enable it on the
machine.
Remote UI
[Remote UI]: [On]
1
Press (Settings/Registration).
2
Press [Management Settings].
3
Press [License/Other].
4
Press [Remote UI].
5
Press [On] for <Remote UI> → [OK].
You can specify the desired settings for <Use SSL>.
6
Press [Close].
7
Turn OFF the main power of the machine, and then
turn ON the main power again.
The [Remote UI] setting becomes effective only after turning the
machine’s main power OFF, and then ON.
The Remote UI can now be used. Next, access the Remote UI from
a computer.
8
Start the Web browser on your computer.
9
Enter ‘http://<IP address or host name of the
machine>’ in [Address].